Navistar International NAVKAL PRO ECM Programming Software, CF-53 Toughbook w/ Nexiq USB-Link 2 Adapter - Preloaded & Ready to Use!
NAVKAL PRO FUNCTIONS/CAPABILITIES:
- Calibration Updating
- On Screen Vehicle Information Display
- ECM Software Version & Upgrade Available
- Read & Clear Diagnostic Trouble Codes (DTC)
- Original Equipment Manufacturer (OEM) Controlled Parameter Updates
- Blank Module Programming
License Information:
- Purchase includes a 1 Year subscription to NAVKAL PRO. Each year the license needs to be re-purchased.
- This is the same software used in International / Navistar Dealerships.
- Software Download link and activation codes will be sent in an email.
- NAVKAL PRO can reflash a used replacement ECM as long as the ECM part # and revision # are the same. Call International Parts to get your original ECM part # and revsion #. The new calibration is included with NAVKAL Pro for free. The replacement ecm can be new or used, both can be re-programmed. The used ECM may have an unforeseen problem, so it may not take the re-flash of the calibration.
Minimum System Requirements:
- Windows 7 or Higher
- 1GHz Intel Core 2 Duo, AMD Athlon X2 or better
- 2GB (32-bit) or 4GB (64-bit) of RAM
- 300MB of available hard disk space
- 1024 x 768 resolution monitor
- One or more RP1210A compatible communication devices with SAE J1708 and/or SAE J1939 support
Recommended Adapters:
- NEXIQ™ Technologies – USB-Link2 (Included)
- Dearborn Group Technologies – DPA 5
- Noregon® Systems, Inc. – DLA+, DLA+ Wireless
NOTE: Please refer to each manufacturer’s website for additional information.
* Programming changes not supported outside of the Navistar Dealer Network *
- Emission Changes Involving Emissions Label Replacements
- Horsepower Upgrades
- Engine/Exhaust Brake Additions
- Engine Replacement Programming
- Component Serial Number Updates
NOTE: Navistar Engine Diagnostics software is registered to the end user and is not returnable!
PLEASE NOTE: NEXIQ HAS REMOVED THEIR 6-PIN ADAPTER FROM THEIR KIT
Includes:
- USB Link
- 15 ft. USB cable
- Quick Start reference Guide
- 9-PIN & OBD-II Adapter
- Drivers are downloaded from Nexiq website
API Support:
Protocol Coverage:
- 3 CAN - J1939/CAN125/CAN250/CAN500/CAN1000
- Automatic bit rate detection for all standard CAN channels
- Single Wire CAN
- Fault Tolerant CAN
- J1587/J1708
- J1850
- ISO 15765 (Diagnostic CAN)
- ISO 14230 (KWP2000 over ISO9141)
- J2534
- ALDL
- ATEC 160 (160 baud)
Features:
- RP1210A, RP1210B, RP1210C and J2534 API support
- Easy USB connectivity using Laptop USB Port
- Wired Connectivity - No Bluetooth/Wireless
The NEXIQ USB-Link 2 will communicate with the following OEM Programs:
- Detroit Diesel Diagnostic Link
- CAT Electronic Technician (On-Highway only)
- Cummins Insite Lite / Pro
- International - ServiceMAXX Fleet Pro
- Hino eXplorer
- Volvo PTT
- VCAD Elite Mack/Volvo
- V-MAC Service Tools
- Allison DOC® For PC-Service Tool - Protocols Supported: J1939, J1708/J1587, and J1850
- Allison DOC® For Fleets (1000/2000) - Protocols Supported: J1939, J1850
- Allison DOC® For Fleets (3000/4000) - Protocols Supported: J1939, J1708/J1587
- Navistar Engine Diagnostics (NED)
- NavKal Pro ECM (Pre-Installed)
- Eaton ServiceRanger
- Bendix ACom
- WABCO Toolbox
- Freightliner ServiceLink
- International ABS
- International DLB
- International Intune
- International IPC v2.02
Refurbished Panasonic Toughbook CF-53, Win10, 2.7GHz, 8GB RAM, 500GB SSD:
- Intel Processor i5
- Windows 10
- 8GB RAM
- 500GB Solid State Drive (SSD)
- Touchpad with Multi Touch
- 14″ High Definition 720p LED 1366 x 768
- Anti-reflective and anti-glare screen treatments
- Drop and Spill-resistant
- Wifi Comes Standard
- Battery & Charger Included
A GOOGLE AD IS SHOWN BELOW-IT IS NOT ASSOCIATED WITH THE PRODUCT ABOVE
