Automated Smart Charger
Automated 12 Volt charger will charge and maintain up to six batteries at a time. Connect up to three ATM-BusPro-600's together and with optional lead sets charge and maintain up to 36 batteries. Each station operates independently. Lights indicate defective battery, charging, maintaining and improper connections. The ATM-BuPro-620 prevents overcharging and removes sulfation by means of a micro controlled current pulse.
Features Include:
-
Modular design with 6 independent stations
-
5 Amps charging output per station
-
Maintenance output per station 13.2 Volts w/ 0 to 2.5 Amp variation as needed
-
115 VAC (220 VAC available)
-
Threaded post adapters can be removed to secure ring terminals
-
Red LED's indicate Charging or Defective Battery if flashing
-
Green LED's indicate Charged and Maintaining ready for load test
-
Both Red and Green LED's indicate Topping off Battery
Specifications:
BusPro-600: 220 Volt Input (without plug)
Micro Controllers: Each of 6 stations are independently controlled
Over Charging: Each controller prevents over charging
Sulfating: Each controller creates a current pulse to remove sulfating
automatically
Charge Mode: 5 Amps per station
Maintenance Mode: 13.1 Volts with 0 to 2.5 Amp variation as needed
Temperature: 0° to 120° F
Humidity: 0 to 85 % non condensing
Red LED Only: One per station indicates “Charging” or “Defective Battery” “if
flashing”
Green LED Only: One per station indicated “Charged and Maintaining” ready for
load test
Red & Green LEDs On: Indicates “Topping of Battery”
Error: No lights indicate improper polarity or connection
Power: AC power
Clamp Leads: 6 ft. 18 GA
Expansion: Up to 3 BusPro can be hooked together using the AC outlet on the left
end
Capacity: Using the optional AC-8 lead sets you can charge 6 additional
batteries
Size: 3” x 8” x 36”
Shipped Weight: 31 lbs.
A GOOGLE AD IS SHOWN BELOW-IT IS NOT ASSOCIATED WITH THE PRODUCT ABOVE