Software for the Pro-Link Plus and Pro-Link Graphiq

Software Kit Includes:

• MPI-

  Key Features:

  • Provides real time diagnostic data
  • Easy to use menus and message screens
  • Additional datalist parameters
  • Speed limit parameters
  • Exhaust temperature monitoring
  • English/Metric menu saves setting to PCMCIA card
  • EGR diagnostic support
  • Covers diagnostics for DDEC software through R30

  Pro-Link

  The Pro-Link Plus scan tool is designed to support all of Nexiq’s heavy duty vehicle and marine applications. It provides real-time data, diagnostic information and on-screen trouble code definitions. It’s designed to guide technicians through even the most complicated vehicle tests using simple menus and message screens. Pro-Link’s built-in flight (snap-shot feature) recorder lets you record data on test drives then review it back at the shop.

  The Pro-Link also has a 4-line, 20 character per line LCD display and can even help identify difficult intermittent problems. With the adjustable display the Pro-Link is easy to read in different lighting conditions. The RS-232 serial port allows you to connect the unit to the, Pro-Link printer or a personal computer. The heavy duty starter kit has everything required to complete basic heavy truck diagnostic procedurs.

  The Detroit Diesel application software provides the capability to reprogram and diagnose Detroit Diesel DDEC III and IV electronic systems. To address advanced capabilities provided by Detroit Diesel, the MPC uses PCMCIA cards. The card is plugged into the back of theunit, and provides additional functions unique to Detroit Diesel. The following list contains all of the features and functions available with this card.

  Pro-Link Features: 12V cigarette lighter adapter Fuse protected power cable Ready to operate in seconds RS-232 port for modem connection Specially designed oversized carrying case LCD display with contrast adjustment Create custom data lists Troubleshoot driveability, emission, ABS and body control systems

  Provides real-time vehicle data On-screen trouble code definitions Easy-to-use menus and message screens CE compliant English/Metric menu saves setting to PCMCIA card EGR diagnostic support Covers diagnostics for DDEC software through R30

  MPC:

  The Multi-Protocol Cartridge (MPC) is an Intel-based Pro –Link Plus compatible cartridge designed to diagnose today’s J1708, J1939, 160 Baud and ISO 9141 vehicles. It provides a new platform that greatly enhances the flexibility of the Pro – Link Plus. To address advanced capabilities provided by the manufacturers, the MPC uses PCMCIA cards. The cards are plugged into the back of the unit, and provide additional functions unique to each manufacture r. The following list contains features and functions that are available with this cartridge.

  MPC Features:

  • Snapshot feature
  • Custom data list
  • Printer support
  • J1708, J1939, 160 Baud, ISO 9141
  • Easy application updates via RS-232 port
  • Future MPC enhancement by side port

  The Detroit Diesel application software provides the capability to reprogram and diagnose Detroit Diesel DDEC III and IV electronic systems. To address advanced capabilities provided by Detroit Diesel, the MPC uses PCMCIA cards. The card is plugged into the back of the unit, and provides additional functions unique to Detroit Diesel. The following list contains all of the features and functions available with this card.

  DDEC III/IV Engine

  New Features:

  • Additional datalist parameters
  • Speed limit parameters
  • Exhaust temperature monitoring
  • English/Metric menu saves setting to PCMCIA card
  • EGR diagnostic support
  • Covers diagnostics for DDEC software through R30

  Features: Displays the specific DDEC system type, including DDEC IV Increased half engine operation functionality Support of low gear torque limiting Supports cutout for natural gas engines Additional ESS transmission functionality Added total engine revolutions to the engine data menu

  Eaton top 2 support added Support for optimized load Reset AFR learn table on natural gas engines New maintenance monitoring Monitor systems Perform diagnostic tests Modify system/data

  DDEC Marine Application

  Features:

  • Supports marine controls version 2.0, 2.5, 3.0
  • Separated menus for marine controls specific parameters
  • Marine engine parameters integrated with standard engine parameters
  • Menu option allows for parameter names to switch from standard to marine description
  • Data list enhancements

  Series 638 (CENTO)

  Features:

  • Data list
  • Defect codes
  • View codes
  • Clear codes
  • Print Option

  602013 Kit Includes:

  • PN 108004 Pro-Link Plus with storage case
  • PN 208040 Multi-Protocol Cartridge (MPC)
  • PN 805015 Detroit Diesel suite 8 application card
  • PN 501002A  Power and data cable
  • PN 401003 GM 12-pin adapter
  • PN 404024 6-pin J1708 adapter
  • Manual

  DDEC I AND II

  Features:

  • Monitor real-time ECU input and output status
  • Display data parameters and values in English or metric
  • Create custom data lists
  • Read and clear diagnostic fault codes
  • Reference ECU serial number, part number and revision number
  • View EEPROM vehicle /engine calibrations and configure with password:
  • Speed settings and limits
  • Idle shutdown options
  • VSG options
  • Engine protection shutdown options
  • Cruise control
  • and more
  • Fuel injector response times
  • Automatic and manual cylinder cutout for determining power contribution
  • Access and reset total engine and trip information
  • Monitor ECU switch / light status
  • Display diagnostic information for dual fuel vehicle (CNG and diesel)
  • Save and print fuel usage information for fleets up to 25 vehicles:
  • Truck, driver, mileage and date
  • Fuel (total)
  • Hours (total)
  • PTO Hours
  • Average Miles per Gallon
  • Trip Miles and Gallons
  • Isolate intermittent problems in Snapshot mode recording and playback
  • Printer output for printing data and test results

  SYSTEM SUPPORTED: DDEC I & II ELECTRONIC ENGINE SYSTEM

  This cartridge is for use with the Pro-Link scan tool for diagnosing Detroit Diesel DDEC I / II electronic engine controller systems. Simple menus allow technicians to easily navigate through a variety of diagnostic functions. Capabilities include monitoring the vehicle ECU' inputs and outputs, fault code messages, view and change programmed EEPROM data to name a few. It provides access to a full range of comprehensive OEM proprietary data and tests for maintaining top vehicle performance and keeping it on the road.

  DDEC II AND III

  Features:

  • Support for Series 2000 and 4000 Engines with USA and ISO firing order selection
  • Support for Electronic Synchronized Shift (ESS) transmission view and reprogramming feature
  • VSS anti-tamper reprogramming
  • J1708 to PC link feature
  • Cylinder cutout feature
  • Function lockout for enhanced security of calibration data
  • Display and reprogram EEPROM calibration data
  • Display and reprogram injector calibration
  • Display and reprogram parameter descriptions and values in English or metric units

  Additional Features:

  • View and clear diagnostic codes
  • Activate outputs to perform circuit tests
  • Engine total and trip information
  • Snapshot feature for trouble shooting intermittent faults
  • Programmed with simple menus to easily navigate technicians through a variety of diagnostic functions
  • Printer output allows you to print standard data list, custom list, diagnostic codes, calibration configuration, trip information or snapshot data

  ECM output options

  • Turbo recirculation
  • Pressure regulation solenoid

  PWM option

  • Injector pump

  Transmission options

  • RS9, RSX9-A, RSX9-B, RSX9-R, RS10, RSX10

  J1939 engine brake level

  • Clutch test enabled

  DATA LIST PARAMETERS:
  Active codes Inactive codes Engine RPM Crankcase pressure Bypass valve Loop status Exhaust gas AFR Engine load percent Torque Lb-Ft (Nm) ECM volts Vehicle speed MPH / KPH Boost PSI Injection pressure Oil, coolant, fuel and air inlet temperature Intercooler temperature Oil, fuel, barometric, crankcase, coolant and external pump pressure Oil and coolant level	Cruise set MPH/KPH Synchronous reference sensor received Idle speed RPM Engine governor Percent torque limit Idle shutdown information Smoke control Dash light status Stop engine override switch Actuator driver High gear switch Power control switch Cruise control ON/OFF switch Brake/clutch switch Resume/accel switch R1 air inlet pressure R2 air inlet pressure

  DDEC III & IV ENGINE SUITE 8.1 PCMCIA CARD

  The Detroit Diesel application software provides the capability to reprogram and diagnose Detroit Diesel DDEC III and IV electronic systems. To address advanced capabilities provided by Detroit Diesel, the MPC uses PCMCIA cards. The card is plugged into the back of the unit, and provides additional functions unique to Detroit Diesel. The following list contains all of the features and functions available with this card.

  Features:

  • Covers diagnostics for DDEC ECM firmware through version R33 for complete support of fault code data
  • Enhanced EGR diagnostic support
  • Fault code date and time logging
  • 2nd page fault data supported for active faults
  • ECM date and time display
  • Progressive shift parameters

  Additional Features:

  • Data list parameters
  • Trouble codes with text descriptions
  • Perform diagnostic tests
  • Speed limit parameters
  • Exhaust temperature monitoring
  • English/Metric menu saves setting to PCMCIA card
  • Snapshot recording
  • Create custom data list

  DDEC III Engine Features:
  Displays the specific DDEC system type, including DDEC IV Increased half engine operation functionality Support of low gear torque limiting Supports cutout for natural gas engines Additional ESS transmission functionality	Added total engine revolutions to the engine data menu Support for optimized load Reset AFR learn table on natural gas engines New maintenance monitoring Monitor systems Perform diagnostic test Modify system/data

  DDEC Marine Application Features:

  • Supports marine controls version 2.0, 2.5, 3.0
  • Separated menus for marine controls specific parameters
  • Marine engine parameters integrated with standard engine parameters
  • Menu option allows for parameter names to switch from standard to marine descriptions
  • Data list enhancements

  Series 638 Features:

  • Print option added
  • Data list
  • Defect codes
  • View codes
  • Clear codes
  • I/O Status

  Operating System Enhancements:

  • Custom data list can be saved to PCMCIA
  • Data list wrap
  • Includes data freeze feature
  • Snapshot trigger on any fault
  • Faster and easier print function
  • Side button 2 hot key
  • Historic codes, print 2nd page data
  • Print all ECM data
  • Print 2nd screen data inactive faults
  • More descriptive headings
  • Application version number included
  • Tool ID display enlarged
  • Marine menu data list enhancements