Key Features:
- Provides real time diagnostic data
- Bendix tractor and trailer support
- PLC test application
- Read and clear fault codes
- Component tests
Pro-Link Features:
- 12V cigarette lighter adapter
- Fuse protected power cable
- Ready to operate in seconds
- RS-232 port for modem connection
- Specially designed oversized carrying case
- LCD display with contrast adjustment
- Create custom data lists
- Troubleshoot driveability, emission, ABS and body control systems
- Provides real-time vehicle data
- On-screen trouble code definitions
- Easy-to-use menus and message screens
- CE compliant
The Caterpillar kit provides everything needed to diagnose Caterpillar Electronically Controlled engines. The Caterpillar cartridge provides increased functionality for the Pro-Link.
Common Features:
- Display full data list parameters
- Read and clear fault codes
- Reprogram parameters
- Perform calibration functions
- View/reset trip data
- Perform interactive diagnostics
- Use snapshot recording to resolve intermittent problems
Caterpillar electronic engine systems, 3116, 3126, 3176, 3406, C-9, C-10, C-12, C-15, C-16, C-18
|
Reprogram The Following Parameters: |
- Idle Shutdown
- VSG Configuration
- Engine Protection
- Cruise Control
- Progressive Shift
- Engine/Vehicle Options
- Vehicle Speed Limit
- Shifting
- Maintenance Intervals
|
- Idle Settings
- Engine/Gear RPM Settings
- Theft Deterrent
- Fleet Trip Data
- Driver Trip Data
- Change Password
- PTO Configuration
- Engine Rating
- Dash Display
|
|
Interactive Diagnostics:
|
- Vehicle Speed Test
- Cooling fan/multi-function output #4 test
- Cylinder cutout
- Injection actuation pressure driver test
- Injector solenoid
- Inlet air heater test
- MT/AT transmission test
|
- Rack BTM sweep test
- Retarder / exhaust test
- Shut-off solenoid test
- Tachometer circuit test
- Timing BTM sweep test
- Multi-function output #1, #2, #3 test
|
|
Data Display Features:
|
- PTO Configuration
- PTO Kickout (greater than VSL)
- PTO Target Speed
- Multi-function input #1
- Multi-function input #2
- Multi-function input #3
- Actual injector actuation pressure
- Desired injector actuation pressure
- Injector actuation current
- Fast idle switch status
- Fast idle target speed
- Fast idle kickout (PTO switch on)
- Cruise kickout (PTO switch on)
- Service brake switch #1
- Service brake switch #2
- Auto retarder in cruise
- PTO top engine limit
- PTO to set speed
- PTO engine RPM set speed
- PTO cab throttle RPM limit
- Powertrain data link
- Fast idle
- Driver incentive VSL bonus
- PTO activates cooling fan
- Actual and desired Engine RPM
- Vehicle speed
- Throttle position
- Actual/desired engine RPM
- Rated rack position
- FRC rack and fuel positions
|
- Fuel position/fuel position limit
- Actual/desired engine RPM
- Rated rack position
- FRC rack and fuel positions
- Fuel position/fuel position limit
- Actual/desired timing advance
- Estimated dynamic timing
- Timing specification
- Fuel rate, pressure, and temp
- Boost/oil/atmospheric pressure
- Fuel economy
- ECM battery
- Load factor
- PTO torque limit
- Engine coolant temp level
- Intake manifold temperature
- Cruise active and set speed
- Accel and decel active
- Cruise and PTO switches
- Retarder
- A/C fan
- Cruise and PTO kickout
- Idle shutdown
- Totals for idle, fuel, tattletale
- Personality release date and model number
- Last tool identification
- Engine and ECM serial number
- Torque limit
- Transmission style
- Theft deterrent status (auto-enable)
|
Kit Includes:
- MPI-104004 Pro-Link Graphiq
- MPI-202024 Caterpillar Cartridge
- MPI-404024 6-pin J1708 adapter
- MPI-404009 ALLISON OBD-II adapter
- MPI-405028 J1708 9-pin Deutsch with Atari end
- MPI-401015 9-pin Deutsch to Atari Caterpillar
- MPI-501002 Power and data
