Note: This product only covers the 1990 - 2003 model years.
SYSTEMS COVERED
Caterpillar electronic engine systems, 3116, 3126, 3176, 3406, C-9, C-10, C-12, C-15, C-16, C-18
Using OEM proprietary data, the Pro-Link scan tool provides you with real-time vehicle data, diagnostic information and on-screen trouble code definitions. The Pro-Link works on a variety of automotive and heavy-duty vehicle systems. As vehicle technology and computers change, Pro-Link easily updates to current model vehicles with a simple cartridge change. The RS-232 serial port allows you to use the Pro-Link with you PC. Specifics for each manufacturer are stored in the cartridges. All cartridges have a two year limited warranty.
FEATURES for 3406, C-9, C-10, C-12, C-15, C-16, C-18 Engines
- Vehicle speed calibration (2 to 4 byte parameter)
- Transmission style (new transmission options)
- Low speed range axle ratio
- High speed range axle ratio
- Eaton Top 2 override with cruise switch
- PTO engine RPM set speed A
- PTO engine RPM set speed B
- Theft deterrent status (auto-enable)
3126 BASIC AND FULL FEATURE ENGINES
- Low speed range axle ratio
- High speed range axle ratio
- Input #4, #5, #6, #7, #19
- Output #9 (Full Feature)
- Idle quality calibration
- PTO engine RPM set speed A
- PTO engine RPM set speed B
- Theft deterrent status (auto-enable)
- AT/MT/HT part throttle shift speed
KIT INCLUDES: Main unit and Manual
REPROGRAM THE FOLLOWING PARAMETERS
- Idle shutdown
- VSG configuration
- Engine protection
- Cruise control
- Progressive shift
- Engine/vehicle options
- Change password
- Vehicle speed
- PTO governor
- Shifting
- Engine
- Maintenance
- Dash display
INTERACTIVE DIAGNOSTICS
- Tachometer
- 55 MPH speedometer
- MT/AT transmission
- Inlet air heater
- Injector actuation pressure driver
- Injector solenoid
- Cylinder cutout
- Cooling fan
- Retarder enable
- Shut off solenoid
- Rack BTM sweep
- Timing BTM sweep
- Multi-function outputs 1 - 3
- System troubleshooting
- Fuel temperature power correction
DISPLAY DATA FEATURES
- PTO configuration
- PTO kickout (greater than VSL)
- PTO target speed
- Multi-function input #1
- Multi-function input #2
- Multi-function input #3
- Actual injector actuation pressure
- Desired injector actuation pressure
- Injector actuation current
- Fast idle switch status
- Fast idle target speed
- Fast idle kickout (PTO switch on)
- Cruise kickout (PTO switch on)
- Service brake switch #1
- Service brake switch #2
- Auto retarder in cruise
- PTO top engine limit
- PTO to set speed
- PTO engine RPM set speed
- PTO cab throttle RPM limit
- Power train data link
- Fast idle
- Driver incentive VSL bonus
- PTO activates cooling fan
- Actual and desired engine RPM
- Vehicle speed
- Throttle position
- Rated rack position
| - FRC rack and fuel positions
- Fuel position/fuel position limit
- Actual/desired timing advance
- Estimated dynamic timing
- Timing specification
- Fuel rate, pressure and temp
- Boost/oil/atmospheric pressure
- Fuel economy
- ECM battery
- Load factor
- PTO torque limit
- Engine coolant temp level
- Intake manifold temperature
- Cruise active and set speed
- Accel and decel active
- Cruise and PTO switches
- Brake and park brake switch
- Engine brake/clutch switches
- Retarder A/C fan
- Cruise and PTO kickout
- Idle shutdown
- Totals for idle, fuel, tattletale
- Personality release date and model number
- Last tool identification
- Engine and ECM serial number
- Torque limit
- Transmission style
- Theft deterrent status (auto-enable)
|
A GOOGLE AD IS SHOWN BELOW-IT IS NOT ASSOCIATED WITH THE PRODUCT ABOVE
