PCMCIA

The Bendix ABS/ATC application software provides the capability to test and diagnose vehicles using EC-15, EC-16, EC-17 and EC-30/30T (Tractor and Trailer) Bendix systems. To address advanced capabilities provided by Bendix, the MPC uses PCMCIA cards. The card is plugged into the back of the unit, and provides additional functions unique to Bendix. The following list contains all of the features and functions available with this card.

FUNCTIONS

Display fault codes

Display front, middle and rear MPH

Check battery voltage

Check warning and traction lamps

Check engine and retarder datalink

Check retarder relay

End of line test

Runs ABS system component tests

System configuration adjusts tire size

Change settings of system parameters

Clears active and history faults

Snapshot mode for capturing intermittent problems

Create custom data lists

Printer output capabilities

POWER LINE CARRIER (PLC) TEST

APPLICATION FOR TRAILER ABS

Effective March 2001, a Federal Government mandate required that heavy-duty trucks have an in-cab trailer ABS warning lamp. Using a new SAE standard called PLC communication, the change requires trailer ABS ECU's to communicate with the tractor ECU via the J560 power line to activate the warning lamp. NEXIQ's PLC Converter (sold separately) is also required for PLC communication. The PLC test application is easy to use and provides the ability to:

Verify trailer ABS ECU for MID 10 and MID 11 messages.

Toggle in-cab trailer ABS warning lamp ON/OFF to confirm operation.

Test tractor and trailer coupled or trailer independently for MID messages.

Notes:

• The MPC (Multi-Protocol Cartridge P/N MPI-208040) will need to be purchased separately if you do not already have this part.
• Requires NEXIQ PLC Converter Kit (P/N MPI-601020)