iCarSoft i980 Professional Multi-System Mercedes Benz / Sprinter Scanner
- i980 is a professional vehicle fault diagnostic tool developed by iCarsoft Technology Inc..
- Specially for full system of one vehicle brand.
- This product supplies colorful TFT screen and unique diagnostic software.
- It enables technicians to accurately diagnose complex problems.
- Support Multi-Language: English, German, Spanish, French, Portuguese, Russian, Dutch
Mercedes Models Covered:
A Class: W 168 , W 169 , W 176
B Class: 245 , 246
C Class: 203 , 204
CL Class: 215 , 216
CLK Class: 209
CLS Class: 218 , 219
E Class: 207 , 211 , 212
G Class: 461 , 463
GL Class: X 164 , X 168 , X 166
GLK Class: X 204
M Class: W 163 , W 164 , W 166
R Class: 251
S Class: 220 , 221 , 222
SL Class: R 230 , R 231
SLK Class: R 170 , R 171 , R 172
SLS: C 197
SLR: Series 199
|
Carsoft Benz Scan Tools i980
The system offers total diagnostic coverage of all engine, chassis and body systems:
Reading and re-setting of diagnostic trouble codes (DTC)
Real-time reading of dynamic data
Full component activation clearing and re-setting of adaptation values
Coding of all engine, chassis, body and instrumentation modules
Key configuration
Procedure for fitting Mercedes- Benz accessories through the D2B ring and MOST bus
Total ASSYST / ASSYST + control (Active Service System) to update on board service history.
|
|
• DAS: Concise interface and straightforward operation using a wintel computer you can realize a quick and accurate code reading and testing on the cars system.
Features:
• Engines (All Gasoline & Diesel Systems)
• Transmissions and Electronic Selector Modules
• Airmatic and Active Body Control Suspension Systems
• Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
• Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s
• Drive Authorisation System
• Sam (Signal Acquisition) Modules
• Electronic Ignition System (EIS)
• Pneumatic System Equipment and ATA functions
• Air Conditioning / climate control Systems
• Instrument Cluster
• Tyre Pressure Control
• Parktronic System
• Keyless Go
• D2b Command & Audio Gateway (D2B and MOST networks)
• TV Tuner
• Headlamp Range Adjustment
• Seat Electronics
• Rvc, RST & Vario Roof modules
• Automatic Clutch System ACS
• M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)
• Assyst & ASSYST + systems
• Compatibility: All Mercedes Benz vehicles listed above with OBDII
• NOTE: Does not reset Mileage for Oil Change maintenance
|
Eight Super Advantages:
1. The fastest full color, 2.8” TFT 320*240 pixels
2. USB 2.0 High Speed Upgrade
3. Support Multi-language
4. Read & Clear DTCs
5. Read Date Stream
6. Silicone keys with great customer experience
7. Full System Diagnosis
8. Diagnose Single Brand of all Models ( OBDII-16 DLC )
Features for Mercedes-Benz:
• Read DTCs
• Clear DTCs
• Read live data stream
• Single Brand of all Models ( OBDII-16 DLC )
• Full system diagnosis
• Upgrade via USB 2.0
• Multi-language
OBDII function:
1. Read Codes
2. Erase Codes
3. I/M Readiness -- I/M Readiness indicates whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
4. Data Stream
5. Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
6. O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle’s on-board computer.
7. On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
8. Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.
9. Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
10.Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
11.Turn off Check Engine Light (MIL), clear codes and reset monitors
12. Read live PCM datastream
13. Support CAN (Controller Area Network) and all other
14.Multilingual menu and DTC definitions- English, Spanish, and German, etc
15.Read pending DTCs
16.Read permanent DTCs
17. DTCs search
18. Supports all the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
19. Works on all 2001 and later OBDII compliant PETROL European vehicles
20. Works on all 2004 and later OBDII compliant DIESEL European vehicles
21. Works on all 1996 and later OBDII compliant US and Asian vehicles
22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More
Specifications
A) Display: 2.8” Color screen , 320 x 240 pixels display with contrast adjustment
B) Operation Temperature: 0 ℃ -- 50 ℃
C) Storage Temperature: -20 ℃ -- 70 ℃
D) Power: 9V -- 18V
E)Operating current:100mA@12V(Typical)
F)Power consumption:1.2W(Typical)
G)Dimension:121mm*86mm*26mm(LxWxH)
H)Weight:300g
Contents:
• Hardcopy User’s Manual
• 6-foot OBD II cable
• USB cable
• Nylon carry case
FREE eAutoRepair 1 Week Factory BMW / MINI Repair Manual
 |
FREE GIFT with Purchase!
1 Week Activation Card to eAutoRepair
Do-It-Yourself Automotive Repair Information
1 Week Access - One Vehicle |
Automotive code scanners are quickly becoming the latest tool in the do-it-yourselfers tool box. These handheld devices make it convenient for anyone to respond to check engine warnings lights and many other symptoms or problems detected by the vehicles computer. Trouble codes and code definitions associated with the problems are easily retrieved.
But once diagnosed, how do you FIX the problem? eAutoRepair provides the perfect online solution with instant up-to-date information on vehicles from 1983 to 2010. The data is made available by Mitchell1, the leading information provider to the automotive aftermarket for 85 years. This subscription based resource includes Diagnostics, Troubleshooting, Repair, Maintenance, Technical Service Bulletins and Factory Recalls.
