-
Tested and confirmed to work with All
OEM Software
-
Recommended Adapter for Bendix Software
Applications
-
RP1210A Compliant Device
-
1 year Limited Warranty
-
Runs on Windows XP and Vista Business
Description:
The
JPRO® DLA+ PLC Heavy Duty Trailer Brake Kit: Contains
everything you need to connect to the PC and the Tractor or Trailer to perform
J1708/J1587 heavy duty vehicle diagnostics. Comes complete with a 6 and 9 Pin
Y-Cable to connect to the truck, a PLC J560 cable with "T" connector
to connect to the trailer, a USB cable to connect to the PC, and a durable carry
case to keep your adapter protected and organized. Works with any OEM
software application and allows users to communicate with and diagnose ABS and
other PLC and J1939/J1708/J1587 devices.
Kit
Contents:
 |
Noregon's JPRO® DLA+ PLC
Adapter is a USB interface adapter and comes
with everything you need to connect a vehicle or trailer to a PC in order
to run diagnostics on heavy duty vehicles. Works with any OEM software
application and allows users to communicate with and diagnose ABS and
other PLC and J1708/J1587 devices. TMC RP1210A compliant device.
Comes with a 1 year limited warranty on the adapter. Extended 2 year
warranty is available for an additional fee. |
|
 |
Manufactured with the highest standards of quality, the 6
and 9 Pin "Dual CAN" Y-Cable provides you with a solid
connection from the truck to any JPRO® DLA+ adapter so messages are
received without delay or connection problems. The same cable as our 6 and
9-Pin Deutsch Y-Cable, this Dual CAN version contains extra pins that
support Dual CAN communications.
Measures 3' in length. |
 |
Noregon's PLC J560 Cable
with T Connector is a 7-way diagnostic interface
adapter that allows for connecting to the trailer's ABS system through the
7-way interface at the nose of trailers in order to perform diagnostics.
For use with March, 2001 and later production models. |
 |
USB Cable for
connection from your JPRO® Data Link Adapter to your PC.
Measures 15' in length. |
|
|
JPRO® Carry Case: This
rugged and durable case is to keep your adapter and cables organized and
protected from the elements of the service bay environment. |
|
|
|
|
|
Quick Start Guide: Get
up and going in no time with the easy to understand Quick Start Guide. |
Supported Applications:
The JPRO® DLA+ PLC is designed to work with any RP1210-A
compliant diagnostic application. The following applications have been tested
and are confirmed to be compatible with the Noregon JPRO® DLA+ PLC:
- Allison — Allison DOC™ For Fleets (WTEC)
- Allison — Allison DOC™ For Fleets (1k/2k)
- Allison — Allison DOC™ For PC
- Bendix — ACom™ Tractor
- Bendix — ACom™ Trailer
- Caterpillar — CAT ET
- Cummins — INSITE™
- Detroit Diesel — DDDL
- Eaton — Service Ranger
- Freightliner — ServiceLink
- Haldex — ABS
- International — IPC Fleet
- International — INTUNE™ Fleet
- International — MD Fleet
- Meritor WABCO — TOOLBOX™
- Volvo — VCADS
- Wabash — Wabash ABS
- ZF Meritor — TranSoft
General Information
- CAN/J1939 and J1708/J1587 in a single device
- Powered via vehicle connection
- Extensible through flash firmware downloads
- Manufactured under the ISO 9001 quality standard
- SAE J1455-compliant
- CE certified
Licensing
Capabilities
- Supports PC USB port using off-the-shelf cabling
- Supports multi-threaded applications
- Supports CAN/J1939 and J1708/J1587 concurrently or
individually
Operating System Requirements
- Windows XP or Vista Business
Minimum PC Requirements
- Pentium IV or equivalent
- 1 GB RAM
- 100 MB free hard disk space
- 1 free USB port (cable included)
Warranty
- 1 Year Warranty. Extended 2 year warranty is available
for an additional fee.
For more information on the JPRO® DLA+ PLC Adapter Kit,
download our Printable
Product Description (.pdf). (Adobe Acrobat required)
