JPRO® DLA+ and Trailer Diagnostic Adapter Bundle - A complete, easy to use, heavy-duty diagnostic & troubleshooting connection for trucks and trailers!
Tested and confirmed to work with ALL OEM software!
Runs on Windows XP, Vista Business and Windows 7 & 8
About the Product:
Noregon's JPRO® DLA+ 2.0 P/N 122061 and Trailer Diagnostic (PLC) Adapter P/N 122511 is a USB interface adapter and comes with everything you need to connect a truck or trailer to a PC in order to run J1708/J1587 diagnostics on heavy duty vehicles. Works with any OEM software application and allows users to communicate with and diagnose ABS and other PLC and J1939/J1708/J1587 devices. Comes complete with a 9 Pin Cable to connect to the truck, a PLC J560 cable with "T" connector to connect to the trailer, a USB cable to connect to the PC, and a durable carry case to keep your adapter protected and organized.
--JPRO® DLA+ 2.0 122061 is a USB interface adapter for the Truck. Comes with everything you need to connect a vehicle or trailer to a PC in order to run diagnostics on heavy duty vehicles. Works with any OEM software application and allows users to communicate with and diagnose ABS and other PLC and J1708/J1587 devices. TMC RP1210A compliant device. Includes a 6 & 9 Pin "Dual CAN" Y-Cable: The 6 and 9 Pin "Dual CAN" Y-Cable provides you with a solid connection from the truck to any JPRO® DLA+ adapter so messages are received without delay or connection problems. The same cable as our 6 and 9-Pin Y-Cable and manufactured with the highest standards of quality, this Dual CAN version contains extra pins that support Dual CAN communications. Measures 3' in length.
Trailer Diagnostic (PLC) Adapter P/N 122511: Noregon's PLC J560 Cable with T Connector is a 7-way diagnostic interface adapter that allows for connecting to the trailer's ABS system through the 7-way interface at the nose of trailers in order to perform diagnostics. For use with March, 2001 and later production models.
--USB Cable: USB Cable for connection from your JPRO® Data Link Adapter to your PC. Measures 15' in length.
--JPRO® Carry Case: This rugged and durable case is to keep your adapter and cables organized and protected from the elements of the service bay environment.
--A CD with software drivers
--1 Year Limited Warranty on the Cables and Adapter.
The JPRO® DLA+ 2.0 P/N 122061 and Trailer Diagnostic (PLC) Adapter P/N 122511 is designed to work with any RP1210-A compliant diagnostic application. The following applications have been tested and are confirmed to be compatible with the Noregon JPRO® DLA+ PLC:
- Allison — Allison DOC™ For Fleets (WTEC)
- Allison — Allison DOC™ For Fleets (1k/2k)
- Allison — Allison DOC™ For PC
- Bendix — ACom™ Tractor
- Bendix — ACom™ Trailer
- Caterpillar — CAT ET
- Cummins — INSITE™
- Detroit Diesel — DDDL
- Eaton — Service Ranger
- Freightliner — ServiceLink
- Haldex — ABS
- International — IPC Fleet
- International — INTUNE™ Fleet
- International — MD Fleet
- International ServiceMax
- Meritor WABCO — TOOLBOX™
- Volvo — VCADS
- Wabash — Wabash ABS
- ZF Meritor — TranSoft
- Support Dual CAN, J1939, J1708/J1587 and PLC in a single device
- Powered via vehicle connection
- Extensible through flash firmware downloads
- Manufactured under the ISO 9001 quality standard
- SAE J1455-compliant
- CE certified
- Supports PC USB port using off-the-shelf cabling
- Supports multi-threaded applications
- Supports CAN/J1939 and J1708/J1587 concurrently or individually
Operating System Requirements (English or Spanish)
- Windows XP (32-bit) Service Pack 3 or greater
- Windows Windows 7 Professional (32-bit or 64-bit)
- Windows Windows 10
Minimum PC Requirements
- Pentium IV or equivalent
- 1 GB RAM
- 100 MB free hard disk space
- 1 free USB port (cable included)
A GOOGLE AD IS SHOWN BELOW-IT IS NOT ASSOCIATED WITH THE PRODUCT ABOVE